Condenser Temperature Sensor Open Circuit
• When the sensor circuit resistance is above 1785Ω.
• Indicates:- Open circuit.
- Defective or wrong sensor.
- Defective wiring.
- Defective controller.
Hở Mạch Cảm Biến Nhiệt Độ Dàn Ngưng
• Khi điện trở mạch của cảm biến vượt quá 1785Ω.
• Cho thấy:- Mạch hở.
- Cảm biến sai loại hoặc bị lỗi.
- Dây kết nối bị lỗi.
- Bộ điều khiển bị lỗi.
| - Check for damaged sensor wires.
→ Kiểm tra dây cảm biến bị hỏng. - Check sensor connections at controller.
→ Kiểm tra kết nối cảm biến tại bộ điều khiển. - The sensor is a pt1000 – 2 wire sensor (MP-4000: J3 pin 7-8; CM-4000: J3 pin 17).
→ Cảm biến là loại pt1000, nối tại MP-4000 (J3 chân 7-8) hoặc CM-4000 (J3 chân 17). - Sensor wires can be swapped without affecting measurement.
→ Dây cảm biến có thể đảo mà không ảnh hưởng kết quả đo. - Use an Ohm meter to measure resistance after disconnecting the sensor.
→ Dùng đồng hồ đo Ohm sau khi tháo cảm biến ra để đo điện trở. - Resistance to chassis must be in mega-ohm (MΩ) range.
→ Điện trở đến khung máy phải lớn hơn vài MΩ. - Sensor is pt1000 – positive temperature coefficient (resistance increases with temperature).
Thông số tham chiếu:
• 960Ω @ -10°C
• 1000Ω @ 0°C
• 1039Ω @ +10°C
• 1058Ω @ +15°C
• 1078Ω @ +20°C
• Dải đo hợp lệ: -100°C (602Ω) đến +200°C (1785Ω) |
Để lại một bình luận